SpeedBox 1.2 B fits Bosch (Smart System + Rim Magnet)

The tuning with Bluetooth technology and mobile app for your e-bike with Bosch Gen4 motor and Smart System + "Rim Magnet". Enjoy your unlimited ride and all the great functions that our SpeedBox App has to offer.
SpeedBox 1.2 B.Tuning fits Bosch brings a unique connection of e-bike and mobile phone and suppresses the speed limiter on your e-bike.
The actual speed and other riding data will be displayed correctly in our SpeedBox App - right on the display of your phone.
PROPERTIES:
Maximum speed: Unlimited (max 35 km/h recommended)
Display shows:
Real speed: NO
Correct travelled distance: After the countdown process is
finished
Activation/deactivation (do not perform while riding):
WALK function / - + - + / SpeedBox App
Indication of tuning activation/deactivation: YES (3.5/2.5 km/h)
Compatible with:
All the Smart System displays
All the Smart System motors
SpeedBox App
Not compatible with:
Standard magnet
ABS system

we would like to inform you, that the new update of Bosch motors with the Smart System (Software version 11.13.0) can cause incompatibility with the following SpeedBox products:
 - SpeedBox 1.0 (B.Tuning) for Bosch
 - SpeedBox 1.1 (B.Tuning) for Bosch
 - SpeedBox 1.2 (B.Tuning) for Bosch
We highly recommend avoiding downloading this update.
Please consider, that the warranty of the SpeedBox products does not apply on dysfunctions of the products, that were caused by updating the motor.
Compatible with e-bikes that have a magnet attached to a valve (Bosch Rim Magnet)
How does SpeedBox 1.2 B.Tuning for Bosch work?
This tuning is very easy to control. You will activate SpeedBox 1.2 B.Tuning via mobile app or directly on your e-bike’s control unit by activating the WALK assist function shortly (holding down the “-” button). Your e-bike display will show a value of 3.5 km/h (2.2 mph) and from now on you will be able to ride up to 35 km/h or more. You may change the default speed limit to any limit you want (up to 99 kph), however, to minimize the risk of error codes, we recommend not to exceed 35 km/h.
To deactivate the tuning, activate the WALK assist function shortly again (by holding down the “-” button). Your e-bike display will show a value of 2.5 km/h (1.6 mph) and the speed limit will be reset to 25 km/h. Your e-bike will then work the same as before the tuning installation.
SpeedBox was also designed for e-bikes that do not have the WALK assist function enabled, or activated. In this case, you can activate/deactivate tuning by switching between two assistance modes twice, i.e. by pressing the - + - + buttons.
Activate/deactivate the tuning before the ride (when the e-bike is standing still), not during riding!
When you first open the SpeedBox App, you will be asked to type in a new PIN. This PIN will be requested each time you open the SpeedBox App. After confirming the PIN, you will be asked to set a service password. Your service password will be used in case you forget the PIN or want to change it.
You can set the maximum speed limit by switching the modes from TURBO mode three levels down and then three levels up: eMTB - TOUR+ - ECO - TOUR+ - eMTB - TURBO. An actual speed limit will be displayed after that. The maximum speed of an electric assistance can be switched by activating WALK assist function shortly or by turning the rear wheel 360°. The value of 2.5 km/h on the display corresponds with the limit of 25 km/h, 3.0 corresponds with 30 km/h, 3.5 corresponds with 35 km/h etc. The last displayed limit will be saved after 15 seconds of inactivity.
After finishing the ride, leave the e-bike on for a while until the SpeedBox finishes the "countdown" process (the riding time will continue on the display until it stops and shows the correct distance travelled) to prevent tuning detection on your e-bike.
SpeedBox App for SpeedBox 1.2 B.Tuning for Bosch
SpeedBox App is an application specially designed for SpeedBox B.Tuning, which uses Bluetooth technology to connect your e-bike to your mobile phone. After downloading the application and connecting your mobile phone to your e-bike you will see current data and trip parameters displayed on your phone. Individual trips can be stored so that the results can be compared with friends and together they can monitor their performance. So just enjoy the ride and leave checking the parameters for later!
SpeedBox App features:
• Tuning control
• Speed limit setting
• Saving and viewing your trips
• Invisible mode
• Motor...